• Extends to a Full 12″
• Collapses to less than 2″ From the
• 180° Swivel Left to Right
• High Quality Powder Coat Finish
• All Installation Hardware Included

The ALAM 100x100mm VESA arm mount provides up to 12-Inch of extension, collapses to less than 2.5-Inch, has 180 degrees of rotation and +/- 20 degrees of tilt. The ALAM mount is constructed with 3LBS of steel providing a sturdy and reliable mount. Th

List Price: $ 59.96

Price: $ 11.79

More Lcd Products

Question by justme73: How should speaker wire be placed in wall studs for in wall speakers?
I’m building a house and am wiring for surround sound. I would like to place speakers in the walls and in the ceiling. How should the speaker wire be placed so I can add speakers after drywall is up and the speaker wire is hidden so it is easy to access and not impacted when they put up the drywall.

Best answer:

Answer by mikedamirault
I think it depends on the speaker, but I think that either the right or left side would be hammered to a stud (like outlet/switch boxes), but it may come with a twist rod (similar to those shower curtain rods), with claws on each end that you twist to extend until it grips into the studs, or there may be some that are light enough that instead of connecting to a stud, may just screw into the drywall

Oh, you mean the cable, sorry, I would say, if going vertical just hammer it to a stud using hammer-in staples, for going horizontal, either drill holes in the studs or run everything overhead

Give your answer to this question below!

• Maximum VESA: 800 x 400 – Maximum Weight: 220 lbs – Minimum Extension: 4.5″ – Maximum Extension: 26.5″
• Tilt Range: 15 degrees – Swivel Range: 180 degrees – Construction: Steel – Color: Black
• Wall Plate Dimensions: 18.9″ x 9 3/8″ – Front Plate Dimensions: 34.4″ x 9 3/8″ – Built In Level: Yes
• Security locking mechanism to prevent the TV from unlatching from mount.
• Universal mounting brackets fit nearly all flat-panel TVs

This premium swivel TV wall bracket features a single arm design with incredible extension of 26.5″ to front of typical TV. Its single arm design allows you to tilt and swivel your TV to almost any angle. It supports a wide range of plasma and LCD fl

List Price: $ 84.99

Price: $ 84.99

• Extended Arm s Can Swivel -90 to + 90 Degrees
• Works with 16″ / 24″ and 12′ Stud Walls
• VESA Compliant up to 800 x 600 / Tilts +15/-15
• Extends 33″ from Wall Retacts to 4″
• Capacity Up to 200 pounds or 90 kgss

Model UNB 550 Is one of the strongest mounts on the market today. It has easy to follow instructions with a Durable Powder Coated Finish. The color for this mount is Black VESA 800 compatable
Solid Steel Arms Strongest on the Market
Unlike the other

List Price: $ 299.95

Price: $ 99.95

• Fits most 32″ to 60″ flat panel screens(please check TV VESA and weight)
• VESA compatible up to 710×450 (28″W x 17.7″H); Supports screens up to 165 lbs
• Solid sturdy wall plate provides strength and durability
• Adjustable 15 degree of forward tilt; Comes with 6″ 3-Axis Magnetic Bubble Level
• Standard hardware pack and free 7 ft high-speed V1.3C HDMI cable included

This heavy duty steel mount fits most 32″ to 60″ Plasma TV or LCD monitor. This Universal Flat Panel Mount offers quality, versatility and security for 32″ to 60″ Flat panel televisions. It features a high capacity and low profile design and adjustab

List Price: $ 119.99

Price: $ 24.59

Related Plasma Products

Question by JK: Should the plasma tv be centered on the wall as the mantel and corbels are?
We are installing a plasma tv over the fireplace on a brick wall. The fireplace is not centered. There is a mantel shelf that is maybe ten feet long and is centered with corbels. It is about seven or eight inches off center of the fireplace. Should the plasma tv be centered on the wall as the mantel and corbels are? Or should it be centered on top of the fireplace?

Best answer:

Answer by Insane_mad_maniak
one thing you should know, did you check in the manual were it has your plasma tv and a fireplace with a line going through it?

because heat will lessen the lifespan of it, and case it to overheat and be damaged. i’d find another place for it away from any heaters/central heating radiators.

if you really want to place it there, i’d put it in the center of the actual chimnea breast, or the center of the mantle, because it will look off center and odd if it’s not.

Know better? Leave your own answer in the comments!

• Fits most 23″ – 37″ LCD LED plasma flat panel screen (Please check TV VESA and weight)
• Supports screens up to 165 lbs
• Fits VESA hole patterns from 200×100 up to 400X400
• Easy adjustment of tilt forward to 15 degrees
• Standard screws to TV or to the wall included

The VideoSecu tilt mount is made of heavy duty steel, ultra-strong for mid-size TV. This Universal Flat Panel Mount offers quality, versatility and security for most 23″-37″ Flat panel televisions, and some for 40″ to 46″ TV. This Wall Mount features

List Price: $ 79.99

Price: $ 25.00

• Universal Design Fits Most 32-55 inch TVs, Supports up to 165LBS; Clear & Precise Instructions for Easy Installation Included
• 1.9″ Profile from Wall; Tilt Range: 15° Downward
• 6-Inch 3-Axis Magnetic Bubble Level Included; Unit Weight: 8 Lbs.
• Hole Pattern Coverage: 27.7″ Horizontal by 19″ Vertical or VESA 100×100, 200×200 , 300×300 , 400×400 and 400×600
• Unit Materials: Arms, Wall Plate and TV Plate: 100% High Grade Steel; Professional Black Powder Coat Finish

The GSI GMB Tilt Wall Mount offers a 0-15 degrees of tilt while maintaining a slim 1.9″ profile in the flat position. Weight capacity 160lbs supports hole patterns up to 28″ (711mm) wide by 19″ (483mm) tall. The universal design fits virtually any 32

List Price: $ 99.99

Price: $ 19.99

Best answer:

Answer by skiracer712
Find where there are studs and put a board across them, they should be fairly close together. You can even stain the board or paint it, it should be covered by your tv anyways. Then attatch the tv mount to that board.

or you could get a ceiling mount.

What do you think? Answer below!

• Three adjustable 6mm tempered glass shelves with shelf capacity of 30 lbs each
• Integrated cable management hides wires
• Use with or without flat panel
• Paintable and trimable covers
• Easy to Install

OmniMount’s elegantly stylish TRIA three-shelf wall furniture system lets you put your home theater A/V components on the wall along with your flat panel TV and hide the power and connection cables at the same time. Designed for easy do-it-yourself i

List Price: $ 149.95

Price: $ 149.95

Related Home Theater Systems Products