CHEETAH MOUNTS LCD TV ARTICULATING ARM WALL MOUNT FOR 23-37″ DISPLAYS BLACK
- Fits VESA 100 and 200, Up To 65Lbs
- 180 Degrees Swivel, 19.5-Inch Extension
- Single Stud Installation, Powder Coat Paint
- 30 Degrees Of Tilt Up Or Down
- Installation Manual And All Hardware Included
Product Description
This is a larger and sturdier mount for LCDs ranging in size from 23″ to 37″ and weighing up to 65lbs. This mount fits the larger VESA 200 hole patterns in addition to VESA 100. This arm collapses to less than 2.5″ from the wall yet extends to over 19″ allowing you to swivel displays up to 37″ a full 180 degrees. The wall plate has center vertical mounting holes for single stud installation and once mounted, the wall plate is concealed by matching cover pieces gi… More >>
CHEETAH MOUNTS LCD TV ARTICULATING ARM WALL MOUNT FOR 23-37″ DISPLAYS BLACK
Related posts:
- CHEETAH MOUNTS PLASMA LCD TV TILT WALL MOUNT FOR 23-37″ DISPLAYS BLACK
- Opteka 32 to 60-Inch Plasma and LCD TV Articulating Dual Arm Tilting Wall Mount for HDTV Displays (Black
- VideoSecu Articulating Wall Mount for LCD Plasma TV VESA 200/300/400 Mp29B 1kr
- Monster FS-M200-MF-SLV Smartview Fixed Low-Profile Wall Mount for 26″ to 37″ Displays
- Unibrak UNB 550 Dual Arm Articulating Cantilever LCD Plasma TV Wall Mount 37″ 42″ 50″ 58″ 65″ Sony LG Panasonic Samsung Pioneer
Very heavy box, and haven’t put it up yet but this seems like a great product, can’t wait to put it up…
Rating: 5 / 5
Like a couple of other people have stated, this mount is not the most steady, but does the job. Taking it apart is definitely the way to go to mount on the wall. I will probably buy a smaller mount to use for my PC monitor. The price certainly is right
Rating: 3 / 5
This mount is probably not even close to the best mount you can get but it surely gets the job done. You have to pretty much disassemble the entire thing to hang it and then once it is hung it is kinda wobbly, but I am not afraid that it will FAIL. For the price what do you expect. Good enough for my 32″ LCD.
Rating: 3 / 5
Very good mount. I like the idea of pulling the TV from the wall if I desire and the up and down tilt the mount provides. All mounting hardware is included with the mount including a level and hex wrenches (metric). Highly recommended.
Rating: 5 / 5
Got mount for my 32″ sharp. was confused about the mounting hole in the center of wall plate called cheetah mounts. The center hole is not nessacarry their are 6 other places for screws to mount to the wall. Have had no problems with mount since installed. The arms were very tight out of the box i loostened them to make installation easier, when hanging TV their was a little sag but after tightening the bolts i loostened back up that went away. Great mount asy to install. If you are going to use the 4″x4″ hole pattern you need to take 4 philips bolts out and remove the 8″ plate. Not hard to do. This is a great mount and when i called in at 6:30PM there was no answer but i received a call back the following morning. It was great customer service. Will be buying a mount for my 52″ soon
Rating: 5 / 5